Re: Mac OS 10.8 VM cannot join VLAN/different subnet than host with Fusion 5
FIXED IT--partially, at least. It had to do with the packet being truncated by VMware. According, I configured VLAN1 on the host, and in the hardware settings, chose "Jumbo Packet Size". I then...
View ArticleClik here to view.
Re: Will there be a September release of the VMware Workstation Technology...
Based on the last two major release of VMware Fusion there were only 2 TP releases and the GA Release was released prior to the last TP expiring, so it's a good guess!
View ArticleRe: Mac OS 10.8 VM cannot join VLAN/different subnet than host with Fusion 5
Have you set the Guest's OSes Network Adapter's MTU to also use Jumbo (9000)?
View ArticleRe: Mac OS 10.8 VM cannot join VLAN/different subnet than host with Fusion 5
I did; it immediately reverts to Standard (1500) after saving. Not sure if its an OS X bug or a VMware bug.
View ArticleRe: ESXi 5.1: Attach 4TB physical (raw) drives to a VM - possible?
If you get it to work - it won't be supported, RDMs are not supported on local storage. The maturity is ESXi is complimented by the enterprise-nature of its design, where as local SATA disks are...
View ArticleRe: Mac OS 10.8 VM cannot join VLAN/different subnet than host with Fusion 5
In an OS X 10.8.3 Virtual Machine, it holds for me from the System Preferences... > Network... however you can also use the following command in a Terminal: Syntax: networksetup -setMTU...
View ArticleError: Unknown Namespace software
Hi Guys, I was trying to remove a VEM (Cisco Nexus 1000v component) from one of the ESXi 4.1 host using the following command: esxcli software vib remove -n cisco-vem-v140-esx --maintenance-mode but...
View Articlescript to gather VM' vmdk path and datastore canonical name
Hi Can somebody please help with a script that I am working on I am trying to gather all VM's and the datastores on which their hard drive reside on along with the canonical name of the datastore this...
View ArticleRe: vSphere 5 support for Exchange 2013?
Exchange, like any other application, doesn't see the Hypervisor. Your OS, presumably Windows 2012, is supported by vSphere 5. Asking whether a particular version of an application is supported just...
View ArticleQuestion about Resource Pool CPU MHz Limit in Resource Pool
I recently went through the vSphere ICM class and had a question that the instructor couldnt answer. In creating a resource pool, under CPU Resources window, Limit section of the window, there is a...
View ArticleRe: vCloud Director 5.1 prepare host failed
I end up downgrade the host back to 4.1 and afterwards the prepare went smoothly. VMware support suggested following steps if I want to use ESXi 5.1, which is not tested by me: Took an ESXi 5.1 host...
View ArticleRe: Mac OS 10.8 VM cannot join VLAN/different subnet than host with Fusion 5
That brought about the beach ball. The guest is 10.8.4, so I'm gonna check the developer notes to see what Apple changed from 10.8.3.
View ArticleRe: Question about Resource Pool CPU MHz Limit in Resource Pool
Since you are running under Fusion - the max CPU will be dependent on the number of vCPUs assigned to the VM -
View ArticleNeed Script For Datastore wise VM finding.
Dear All, we have a above 20 Clusters in one DC and Storage Mapped 200 Luns comes form IBM,Hitachi,CX, we given Name of Datastore as per Vendors name. We need a report How many VM,s are connected...
View ArticleRe: ESXi 5.1 Update 1 crashing randomly with purple screen #PF Exception 14
Hi guys, thanks for all your replies, I had opened up a support case with VMware and this is still a known bug even in ESXi 5.1 Update 1. There is no work around in our situation, well actually I'll...
View Articleinvoke-vmscript
So I am trying this on a support Linux OS but I keep getting this error: And I am 100% sure the credentials I tried are valid, I tried root and my username. There is not much out there on...
View ArticleRe: Take focus when switch between full screen VM using trackpad
Hi Darius, I was thinking of playing with a vmx option like grabbed.priority = high, but... I do like waiting and not having to meddle with the vmx settings way better. Thanks!--Wil
View ArticleClik here to view.
Failed install user rights validations...
We're attempting to setup our testbed for Mirage. During the installation of the Mirage Management Server, I've run across the following error (also attached):the database is SQLSERVER2008R2...
View ArticleRe: if vcenter db needs to be wiped -- what happens to SRM?
As previously stated, the installer will have to be run again and the relationships will have to be rebuilt within SRM (mapping, etc.). Unfortunately just went through that a bit ago but SRM is easy...
View ArticleClik here to view.
Re: RDM Converted to VMDK's
Hmm I don't know Can't you mark a post as Correct or Helpful?
View Article