Re: ESX5.0 Host Not Responding
yep seems the port binding is enabled on both ports correctly., could you paste the screenshot from properties of the storage adapter...?storage -- adapter -- software adapter -- properties -- networking.
View ArticleClik here to view.
Re: Thinapp starting slow when integrating to horizon manager
Oh. I setup the workspace demo in a standalone enviroment without Internet access. My client can't resolve the real DNS of verisign.com and windowsupdate.com. So I added those two records in my private...
View ArticleReport error message.
Hi all, I have a question about report. How to solve this issue? VMmark version : 2.5.1 below are error message in ExeReporterScript-server0.out : hostname: localhost.supermicro.com.tw: Unknown host...
View ArticleRe: ESX5.0 Host Not Responding
Seems your port binding configuration is set-up correct and its complaint as well. Seems that the VMNIC6 might have a cabling or worst case the NIC itself could be gone bad,you could try swapping the...
View ArticleHow to disable IPMI
Hi all. Still very new with esxi. tryng to figure out what I'm doing but I'm liking what I'm seeing so far except one. Apparently my SuperMicro Mobo can't run ESXI if my IPMI is enabled. So I have...
View ArticleRe: Multiple datastores in 1 hard disk
Yes I guess there must be a reason for not doing this. I can only see this useful in certain test environment limited to 1 local hard disk. Example create a "employee1-datastore" and...
View ArticleVMWare Fusion Tech Preview 2013 - VM's don't switch to full screen mode when...
Hi guys, I understand the tech preview of VMWare Fusion 6 was released prior to Mavericks being announced, but thought I'd post about this issue I'm experiencing with the preview (as well as Fusion...
View ArticleLogin under multiple accounts with Windows View Client
I need to be able to have multiple View sessions from a Windows machine. I have a user who logs in as new users to setup their profile. She needs to be able to keep her View session open while she logs...
View ArticleRe: Mac OS 10.8 VM cannot join VLAN/different subnet than host with Fusion 5
patknapp wrote: New problem is that host/guest cannot be firewalled off from one another despite my best attempts (and I'm no nube). Also, Fusion seems to freeze-up the VM's GUI about once every 24...
View ArticleRe: vSwitchUSB0 and pnic vusb0 ?
Hello, Yes this is over a year later but its very handy for reference. Please see this IBM document to explain options around the firmware updates. It only restricts inband updates. IBM Why does my...
View ArticleClik here to view.
Re: Guest issue on ESXi 4
Well we did end up having to use Kroll Ontrack to get back the VMDKs.. they were intact, luckily. But it wasn't cheap ($12k) since we had to use their emergency service level given the long holiday...
View ArticleRe: Mac OS 10.8 VM cannot join VLAN/different subnet than host with Fusion 5
Nancy...VLAN is not a problem, read the discussion above, its been working since Aug 27...I was referring above to the fact that Fusion bypasses host network settings to direct-communicate with the...
View ArticleRe: ESX5.0 Host Not Responding
Hi Avinash, Thank you so much for your help and your time. I'll change the cable and port and let you know. But is there any test to confirm the port fault? As
View ArticlevmWare 4.1.0 doesn't see Intel ET2 Quad Nic
I have an Essentials 4.1.0 ESXi installation runing on an Intel S5500BC server. I installed an Intel ET2 quad Gig nic and it is not showing up. I initially tested the nic in a similar chassie and it...
View ArticleRe: Is anyone satisfied with Fusion 5 and their Retina screen
For Windows 7 in Fusion 5, a workaround for your reference.1. After enabling "Use full resolution for retina display", open Control Panel in Win7.2. Select Control Panel -> Appearance and...
View ArticleRe: Esxi 5.1 - Exchange 2007 - Memory Page File and CPU allocation
Page file recommendations vary greatly at every turn - many of them relate to the days where servers used to have 4GB RAM and throwing 1.5*RAM at disk capacity was very easy to do. I've always left my...
View ArticleRe: Mac OS 10.8 VM cannot join VLAN/different subnet than host with Fusion 5
patknapp wrote: Nancy...VLAN is not a problem, read the discussion above, its been working since Aug 27...I was referring above to the fact that Fusion bypasses host network settings to...
View ArticleConstantly having to consolidate virtual machine disk?
I am having an issue whereby multiple vm's across several ESXi 5.1 hosts are requiring virtual machine disk consolidation. I perform 'snapshot consolidation' and it completes after a few seconds, then...
View Article